This section of the engineering guidelines provides information on the architecture and implementation of the 6900 Handsets on the MiVoice Office 250.
The 6900 handset is Mitel's new premium range of telephones. Currently there are three models of handset available; 6920, 6930 & 6940. From release 5.1, the MiVoice Office Application Suite supports the 6900 handsets and acts a configuration server to allow many of the MiVoice Office 250's features to be used on the 6900's SIP telephones.
From 5.2.20 Support was added for the 6970 IP Conference Phone
To connect to the MiVoice Office 250, 6900 handsets operate as a SIP extension. All call control functionality is provided through the SIP connection directly to the telephone system (or via a MiVoice Border Gateway).
Each 6900 handset requires a Cat-F license on the telephone system.
In addition to the Cat-F licensing on the telephone system, there are two levels of license on the MiVoice Office Application Suite that are used to control 6900 handsets:
Without a license, the 6900 handset can still be connected to the telephone system but would need to be manually configured and would only support the basic SIP features.
In addition to this engineering guide, the following documents contain relevant information to implement 6900 handsets on the MiVoice Office 250:
Document | Description |
---|---|
Mitel Communication Service -Technical Manual / Online Help | Provides information on how to configure the MCS server to support 6900 Handsets, including; Dial Plans, Configuration Profiles, Keymap Profiles Alarm Notification, Page Zones and Image Handling. |
6.3 MiVoice Office 250 Features and Programming Guide |
Provides information on telephone system SIP configuration and restrictions. |
6800/6900 SIP 5.0 Admin Guide | Provides an exhaustive guide to all 6900 handset features including configuration options. |
6920[/30/40] SIP 5.0 Quick Reference Guides | Model specific quick reference guides to introduce end-user features. |
6920[/30/40] SIP Phone User Guides | Model specific phone guides to cover all model specific configuration & features. |
The following sections cover various aspects of 6900 handset implementation on the MiVoice Office 250.
A 69xx working with a DECT headset is still a standard class 3 POE device. As soon as a single PKM is added it requires additional power and becomes a class 4 POE device (See Notes below).
Device Config | POE Class |
---|---|
6940, 6970 | 3 |
6940 With DECT Headset | 3 |
6940 With 1 M695 PKM | 4 (See Notes 3 & 6) |
6940 With 2 M695 PKMs | 4 (See Note 3) |
6940 With 3 M695 PKMs | 4 (See Note 3) |
6940 With 3 M695 PKMs + DECT Headset | 4 (See Note 3) |
An external DC power supply is available for the phones: 50006924 - 6800/6900 AC Adapter Universal.
Note 3: Attention - Devices that require more than 12.95 watts are designated as IEEE 802.3at Class 4 devices. To operate correctly, all IEEE 802.3at Class 4 devices must be connected to a L2 PoE switch that is IEEE 802.3at compliant. Some IEEE 802.3at L2 PoE switches require connected devices to send power allocation requests in excess of 12.95 W (Class 4 devices) using LLDP-MED. Therefore, Administrators must ensure that LLDP-MED is enabled on the L2 switch.
Alternatively, IEEE 802.3at Class 4 devices may be powered with an in-line IEEE 802.3at power injector, or if supported, an AC to DC adapter.
Note 6: Upon initial power up, these sets (with associated accessories) will advertise their power Class via IEEE 802.3at. Once these sets have completed power up, they will advertise modified power requirements via LLDP-MED that are less than what was reported by the IEEE 802.3at Class advertisements. However, the L2 switch must have LLDP-MED enabled to take advantage of the lower power advertisement.